Tuesday, 16 July 2024

Making of an Electric Rickshaw loader - Technical Details - Battery Selection

 

* Selected a reliable and long-lasting battery system to power the E-loader.

* Calculated the required battery capacity based on the motor specifications and estimated load capacity.

We can choose the battery based on the distance range and the budget we can spend. Cost of the vehicle depends on the battery. I had two option 1. To go with LiFePo4 battery since it is safer as per automotive point of view compared to Lithium. 2. Lead Acid. It is cheaper and is easily available.

I chose Lead acid since I do not want to spend huge money on the Lithium.

Now comes the battery rating.

The motor is 48V, so I need to use 48V battery. We do not have 48V lead acid battery. So connected 4 x 12V Lead acid battery in series to get 48V.

I have to choose the range which I decided to have 80km per charge.

The motor consumes 1200W per hour, and the system voltage is 48V, the current rating is 1200/48 = 25A.

So the motor draws 25A current for 1 hour which drives at the speed of 25km/h. If I need to drive 80km, the motor have to run for more than 3 hours.

The chosen battery is 4x12V lead acid battery 100AH

Let us look into the chassis and frame on the next post

No comments:

Post a Comment

Making of an Electric Rickshaw loader - Technical Details - Controller Setup & Charger

  Controller is one of the important component to drive the BLDC motor. We cannot run the motor directly by giving the voltage supply. This ...