Motor Selection
* I opted for a high-quality
electric motor that could provide sufficient torque and power for the E-loader's
intended purpose.
* Considered factors like
voltage, current ratings, efficiency, and durability while choosing the motor.
Please find below the calculation
I used to select the motor rating.
1. Gross weight of the vehicle = 1000kg
(Including the payload)
2. Length x Width = 2795mm x 990mm which
gives the Area in square meter = 2.767 sq.m (Size depends on the user and government
norms for the type of the vehicle)
3. Wheel size = 12” dia = 0.3048 m ; Radius =
0.1524m
4. Efficiency = 85% (Since there is very
minimal loss in transmission of power from motor to the wheel)
5. Maximum speed of the vehicle = 25km/h (Vehicle
with Low speed category)
Distance
travelled per wheel rotation = 2*pi*r = 2*3.14*0.1524 = 0.957m
Convert
25km/h speed in meters per hour = 25000 m/h
Maximum
RPM of the Wheel = 25000/ (0.957 * 60) = 435rpm
Choose
the motor based on the transmission gear ratio connected to the wheel.
Assuming the gear ratio as 10:1, the motor
rpm will be 4350rpm
Force
required for driving the vehicle
F(total)
= F(Rolling) + F(Gradient) + F(Aerodynamic drag)
F(Rolling)
= Crr * M * g
Crr
- Coefficient of rolling resistance
M –
Gross weight of the vehicle
g –
Acceleration due to gravity (9.8 m/s2)
F(Rolling)
= 0.01 * 1000 * 9.8 = 98 Newton
To
calculate the Power required to overcome the rolling resistance of 98 Newton,
P(Rolling)
= F(Rolling) * Speed = 98*6.94 = 680.12W
F(Gradient)
= Mass * Acceleration due to gravity * SinØ
Assume
to move in flat F(Gradient) is 0. So P(Gradient) = 0W
P(Aerodynamic
drag) = Air density * coefficient of drag * Area * velocity3
P(Aerodynamic
drag) = 0.6465 * 0.88 * 2.767 * 334.25 = 526.2W
Total
Power = P(Rolling) + P(Gradient) + P(Aerodynamic
drag)
Total
Power = 680.12+0+526.2 = 1206.32W
So the motor power required to move the
1000kg vehicle on flat surface is 1200W
You can choose the voltage rating available in the market for 1200W motor.
I choose 48V BLDC motor. Higher the voltage, higher the speed.
Chosen motor spec is,
48V, 1200W BLDC motor with 3000rpm
Next we move on to the battery selection