Wednesday, 17 July 2024

Making of an Electric Rickshaw loader - Technical Details - Controller Setup & Charger

 

Controller is one of the important component to drive the BLDC motor. We cannot run the motor directly by giving the voltage supply. This is because, the motor is constructed with 3 different stator winding and the rotor is the permanent magnet, we need to continuously change the polarity of the stator so that the polarity of the  rotor keep following the stator.

Simple cross section of BLDC motor



The motor works on 3 phase supply and the controller drives it by converting the 48V DC from the battery and convert it to 3phase AC.

Controller not only drives the motor but also controls the speed, direction and braking.

I bought the motor, controller, charger and other components from Vision Innovative products.

They are one of the leading manufacturer of E-rickshaw loader and they do customized vehicles.

Next comes the assembly and testing.

Making of an Electric Rickshaw loader - Technical Details - Chassis and Frame

             Chassis plays a significant role in maintaining safety of the vehicle. It should withstand all the troubles that we are giving to it from over loading to accident. 

Different types of load that acts on the Chassis are

·        Static load – Weight of the Chassis components

·        Inertia Load – Own weight of vehicle during breaking and acceleration

·        Momentary duration load such as load applied while cornering at the high speed

·        Impact Load – This is happening during the accident

Absolute care should be taken while choosing the material. Common material used are

1.     Steel

2.     Aluminium

3.     Carbon Fiber

Consider below properties

1.     Yield strength

2.     Tensile strength

3.     Hardness

4.     Weight

5.     Cost

Based on the type of vehicle and the cost we can choose the material. Carbon fiber has excellent properties and it is very costly. Next comes the Aluminium and the last is the Steel.

After choosing the material, this have to be arranged in particular fashion so that it will give additional strength and to accommodate all the components such as battery, motor and controller and also weight should be evenly distributed.

Frame structure can be classified into

1.     Ladder frame – It uses any of the section such as channel, tubular or box type to create the chassis. Usually steel is used in heavy vehicles

2.     Tubular space frame – It is very strong to withstand impact due to high speed and is used in high performance sports cars

3.     Monocoque frame – It is a single piece structure which is used in all modern cars

Seems to be a bit complicated for the person other than mechanical background.

To be simple, we need a structure to move the wheel and carry the load. I created the below structure using steel with tubular section. The dimension marked are in mm




Let us now dive into the electronics part of the vehicle

Tuesday, 16 July 2024

Making of an Electric Rickshaw loader - Technical Details - Battery Selection

 

* Selected a reliable and long-lasting battery system to power the E-loader.

* Calculated the required battery capacity based on the motor specifications and estimated load capacity.

We can choose the battery based on the distance range and the budget we can spend. Cost of the vehicle depends on the battery. I had two option 1. To go with LiFePo4 battery since it is safer as per automotive point of view compared to Lithium. 2. Lead Acid. It is cheaper and is easily available.

I chose Lead acid since I do not want to spend huge money on the Lithium.

Now comes the battery rating.

The motor is 48V, so I need to use 48V battery. We do not have 48V lead acid battery. So connected 4 x 12V Lead acid battery in series to get 48V.

I have to choose the range which I decided to have 80km per charge.

The motor consumes 1200W per hour, and the system voltage is 48V, the current rating is 1200/48 = 25A.

So the motor draws 25A current for 1 hour which drives at the speed of 25km/h. If I need to drive 80km, the motor have to run for more than 3 hours.

The chosen battery is 4x12V lead acid battery 100AH

Let us look into the chassis and frame on the next post

Making of an Electric Rickshaw loader - Technical Details - Motor Selection

 

Motor Selection

 




* I opted for a high-quality electric motor that could provide sufficient torque and power for the E-loader's intended purpose.

* Considered factors like voltage, current ratings, efficiency, and durability while choosing the motor.

Please find below the calculation I used to select the motor rating.

1.     Gross weight of the vehicle = 1000kg (Including the payload)

2.     Length x Width = 2795mm x 990mm which gives the Area in square meter = 2.767 sq.m (Size depends on the user and government norms for the type of the vehicle)

3.     Wheel size = 12” dia = 0.3048 m ; Radius = 0.1524m

4.     Efficiency = 85% (Since there is very minimal loss in transmission of power from motor to the wheel)

5.     Maximum speed of the vehicle = 25km/h (Vehicle with Low speed category)

Distance travelled per wheel rotation = 2*pi*r = 2*3.14*0.1524 = 0.957m

Convert 25km/h speed in meters per hour = 25000 m/h

Maximum RPM of the Wheel = 25000/ (0.957 * 60) = 435rpm

Choose the motor based on the transmission gear ratio connected to the wheel.

Assuming the gear ratio as 10:1, the motor rpm will be 4350rpm

Force required for driving the vehicle

F(total) = F(Rolling) + F(Gradient) + F(Aerodynamic drag)

F(Rolling) = Crr * M * g

Crr - Coefficient of rolling resistance

M – Gross weight of the vehicle

g – Acceleration due to gravity (9.8 m/s2)

F(Rolling) = 0.01 * 1000 * 9.8 = 98 Newton

To calculate the Power required to overcome the rolling resistance of 98 Newton,

P(Rolling) = F(Rolling) * Speed = 98*6.94 = 680.12W

F(Gradient) = Mass * Acceleration due to gravity * SinØ

Assume to move in flat F(Gradient) is 0. So P(Gradient) = 0W

P(Aerodynamic drag) = Air density * coefficient of drag * Area * velocity3

P(Aerodynamic drag) = 0.6465 * 0.88 * 2.767 * 334.25 = 526.2W

Total Power = P(Rolling) + P(Gradient) + P(Aerodynamic drag)

Total Power = 680.12+0+526.2 = 1206.32W

So the motor power required to move the 1000kg vehicle on flat surface is 1200W

You can choose the voltage rating available in the market for 1200W motor.

I choose 48V BLDC motor. Higher the voltage, higher the speed.

Chosen motor spec is,

48V, 1200W BLDC motor with 3000rpm

Next we move on to the battery selection

Monday, 15 July 2024

Making of an Electric Rickshaw loader - Introduction

 

Introduction

 

Today I would like to share my experience on making Electric loader (E-loader). I was very much fascinated about electric vehicles and I just decided to make one for myself for no particular reason. The idea of an E-loader intrigued me, and I embarked on a journey to gather all the necessary technical knowledge from the internet over the course of a year from 2021. In this blog post, I will detail the technical aspects that I paid attention to while creating the E-loader.

 

Research and Planning

 

* Initially, I delved into researching the various components required for an E-loader such as the motor, battery, controller, etc.

* I carefully planned the design and layout of the E-loader to ensure optimal functionality and efficiency.

* Conducted a thorough analysis of existing E-loader models to gather insights into best practices and potential improvements.

Let me start with the Technical aspects in the next part



Making of an Electric Rickshaw loader - Technical Details - Controller Setup & Charger

  Controller is one of the important component to drive the BLDC motor. We cannot run the motor directly by giving the voltage supply. This ...